(1) Electrode size: ≤3000mmX3000mm
(2) Main configuration: 1 set of sandblasting +3 sets of spraying
(3) Processing mode: automatic conveying sandblasting + automatic exchange dual platform + automatic truss-type loading and unloading + four-axis special manipulator automatic spraying (non-stop spraying gun when loading and unloading, the manipulator uses graphic mode to plan the spraying path)
(4) Spraying time: Take 1855mm diameter nickel net as an example, spraying about 3-4 minutes to spray a piece.
(5) Automatic truss-type loading and unloading beat: the truss manipulator is loading and unloading in parallel time during spraying, without stopping the spray gun during replacement, and does not occupy the spraying time
(6) Comprehensive beat: Take 1855mm diameter nickel net as an example, about 18 pieces per hour
(7) Coating materials: NiAl, NiMoAl, NiFeAl, NiXAl, NiXXAl (X is the third or fourth element) and other kinds of.
(8) Coating requirements: the nickel net after spraying, the nickel net increases the weight 240g/ m2-300g/m2 after spraying, the coating after spraying is firmly combined, the coating does not fall off when the nickel net is bent at 120°, the nickel net is consistent in color and the surface is flat after spraying.
① Adopt imported PLC full closed-loop control system, equipped with nickel mesh spray gun and compatible with mainstream spray gun
② Import mass flow control system
③INFINEON inverter power module, supporting full-function monitoring man-machine interface
④ Real-time display of residual powder and non-stop automatic switch powder feeder, continuous powder feeding to ensure continuous spraying
⑤ Spray gun up to 6 powder feeding mode, powder feeding uniform
⑥ Powder feed speed up to 280g/min
⑦ Built-in storage 5000 spray formula process
⑧ Multiple login permissions to ensure process safety
⑨ Anti-freeze mode, the northern region in winter to open the anti-freeze mode
⑩ Information center: continuous display of system status and alarm information
