The powder falls into the powder feeding hopper evenly under the motion of the motor driven gear dial. Under the negative pressure of the carrier gas and the powder feeding valve in the powder feeding hopper, the powder falling into the powder feeding hopper is successively sent into the spray gun system along with the carrier gas, and the spraying process is completed.
| Item | Parameter |
| Weight of powder feeder | 32KG |
| Size | 500×250×1340 mm |
| Feeding way | Dial the tooth plate |
| Powder bucket capacity | 2L |
| Feed gas pressure | 0.15~1.2Mpa |
| Powder feeding speed | 0~300g/min |
| Feeding accuracy | ±1% |
| Powder size | 1-150μm |
| Send the powder gas | Nitrogen or argon |
E-2000 powder feeder is a high-precision powder feeding mechanism based on the principle of dial gear plate plus vibration structure, gravity fall, uniform powder output, wide particle size range, suitable for powder from 1 micron to 150 micron particle size range.
After the top cover is sealed, the powder condition can be clearly seen through the visual transparent observation window on the powder cylinder. The powder reaches the powder outlet along with the bottom feeding plate, and enters the spray gun together with the powder feeding gas. The gas pressure is used in a wide range.
Using the latest international turnover structure, easy to clean the powder, just turn the barrel can pour out the powder.
Compared with the traditional scraper powder feeder, the powder feeder has a more stable state, adapt to the powder of different media, whether metal powder, alloy powder, ceramic powder, plastic powder, have a stable powder feeding effect, at the same time, the powder feeder internal no wear accessories, no consumables, use and maintenance cost is low.
Powder feeder using touch screen operation, user-friendly interface design, easy to get started and easy to operate. At the same time, it supports remote transmission function, which can be connected to the centralized control system remotely, and can also use other external systems to control the powder feeder remotely.
E-2000 powder feeder is mainly composed of powder feeder body, support, electrical box and man-machine interface. The main structure is composed of sealing cover, visual powder cylinder, gear dial, rotary drive, vibration component, powder outlet module and so on. As shown in Figure
The powder falls into the powder feeding hopper evenly under the motion of the motor driven gear dial. Under the negative pressure of the carrier gas and the powder feeding valve in the powder feeding hopper, the powder falling into the powder feeding hopper is successively sent into the spray gun system along with the carrier gas, and the spraying process is completed. The amount of spraying is controlled by a stepless motor. Accurate powder feeding greatly improves the uniformity of coating and coating quality. The powder feeder also has vibration function, which makes the powder feeding width more extensive.
